欢迎光临~深圳馨宁美电子有限公司
语言选择: 中文版 ∷  英文版

  • PoEX-2(1-1G)90W(IEEE802.3 bt 90W 100/1000M)
PoEX-2(1-1G)90W(IEEE802.3 bt 90W 100/1000M)

PoEX-2(1-1G)90W(IEEE802.3 bt 90W 100/1000M)

  • 产品描述:PoE Extender PoEX-3(1-2G)60W IEEE802.3 at 4-pair 60W No need power 1 PoE IN)》2 PoE OUT 10/100/1000M
  • 在线订购


Description:

Ethernet and PoE connections both restrict cable distances to 100 meters between network ports. To overcome this distance limit, network installers can simply connect an PoE Extender in-line with the Cat-5e or Cat-6 cable.

With Gigabit PoE Extender, PDs (such as IP Security Cameras, VoIP telephones, wireless access points) can be installed at greater distances than 100 meters from one another. By connecting PoE Extender for every extra 100 meters of cable, both Ethernet and PoE can be extended to 200 meters, depending on PDs power required and power source.

Gigabit PoE Extender does not require any additional power supply and the connected PDs is fed by an single PoE switch or mid-span, which simplifies installation PoE Extender offers three Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is maintained PoE in connection PoE Switch, 12.36 or 45.78 powered support, support IEEE802.3af & at the power supply, PoE out for the supply terminal 2 Gigabit, PoE total power can reach 60w [PoE Switch or PoE Injector need to provide IEEE802.3at 4Pairs(60W) power].

Features:

Compatible with IEEE802.3af and IEEE802.3at and IEEE802.3at 4Pairs

Extends the range of PoE and Ethernet an additional 100 meters

No additional power supply is required

Automatically detects and protects PoE equipment from being damaged by incorrect installation

Full-rate network throughout the whole extended distance

Wall-Mountable design

Easy plug-and-play installation

Item

Description

No. of channel

1Poe ininto 2(Poe out)

Pass Through Data Rate

10/100/1000 Mbps half/full duplex

Power over Ethernet input

Pin Assignment and Polarity:

Both 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+)

Power over Ethernet Output

Pin Assignment and Polarity:1/2 (-), 3/6 (+)

Output Power: up to 25W for 2 PSE

Indicators

LED indicators are located on the RJ45 connector Power indicator: PoE enabled

Powered success: Power

Network indicator: Link/Act

Connector

Shielded RJ-45, EIA 568A and 568B

Network cable

Shielded category 5 (or higher

Dimension

119mm x 85mm x 28mm

Mounting

Wall of shelf

Environment

Indoor

Environmental Condition

Operating Ambient Temperature: -10 to 45℃

Operating Humidity:

Maximum 90%, Non-condensing

Storage Temperature: -30 to 70℃

Storage Humidity:

Maximum 95%, Non-condensing

Regulatory Compliance

IEEE 802.3af (15.4W) IEEE

IEEE 802.3at (30W)

IEEE 802.3at 4Pairs(60W)



新闻中心

联系我们

联系人:深圳馨宁美电子有限公司

手机:15989475697

电话:+86-755-27678837

邮箱:poe@szpcgl.com

地址: 深圳市宝安区西乡固戍一路汇创2018产业园206 工厂地址:深圳市宝安区西乡固戍一路93号汇创2018创意园207