Key Features:
-Compliance with IEEE802.3af/at, support full port advance standard detection
-Auto extend:1-8 Port 10Mbps 250meter
-Safe: low power devices receive only the power they need
-Safe and reliable power to WLAN access points
-Automatic detection and protection of Non–standard Ethernet Terminals
-Support Auto-MDI/MDI-X
-Support Non-Blocking data forward
-Support Auto-Negotiation and feature of store-and-forward
-Plug-and-Play no configuration required
-Internal power supply
-Applied to CCTV IP camera, wireless AP, VoIP phone and other device requiring power over Ethernet cable
Technical Specification:
Standards |
IEEE 802.3 Ethernet media access control protocol IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100-BASE-TX (Fast Ethernet) IEEE 802.3x Flow Control (full-duplex flow control) IEEE802.1q VLAN Network bridge operation IEEE 802.3af/at Power over Ethernet cable pairs or device |
PoE Performance
|
PoE Standard: IEEE 802.3af/at Power over Ethernet / PSE PD classification identity PoE over current protection PoE short circuit protection PoE power output: Per Port 54V DC, Max. 30 watts/port Power Pin Assignment: 1/2(+)3/6(-), Mode-A, End-Span PoE port priority: support Storage and forward: support Switch Capacity: 2Gbps; Throughput: 1.34Mpps MAC Address Table: 2K; Memory Buffer: 768k |
Transmission Media |
10Base-T: Pair 2 Category 3(Cat3) and above UTP/STP(≤150m) 100Base-TX: Pair 2 Category 5(Cat5) and above UTP/STP(≤150m) |
LED Indicators |
Per Port: Link/Act, PoE Act/Status Per Unit: Power |
Network Interface |
8x10/100Mbps RJ-45 (PoE 1~8 Ports) Auto-MDI/MDI-X ports 1x10/100Mbps RJ-45 Uplink |
Power Input |
Input: 100~240V/AC, 50~60 Hz, Internal Power Supply |
Power Consumption |
104 Watts (Max) |
Normal Mode |
100M;10/100Mbps; |
Extend Mode |
switch extend ,1-8Port ; 5E cat Cable Distance 250M;Data Rate 10Mbps |
Packing dimension/weight |
185*123*44mm / 1100g |
Environment |
Operating Temperature: 0℃~40℃ (32℉~104℉); Storage Temperature: -40℃~70℃ (-40℉~158℉); Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
Certifications |
CE/FCC/ROHS |